Artículo wiki · Colección 02

Selección de Frecuencia

Referencia técnica sobre Selección de Frecuencia para el diseño, integración e implementación de sistemas de energía inalámbrica.

6 minArtículo 04/16WPT Resonante

Frequency Selection — educational diagram — Fig.: Diagrama educativo de “Frequency Selection”.

Operating frequency sets the size of magnetics, the difficulty of soft switching, skin/proximity loss in copper, and which EMI limits apply. Industrial resonant chargers commonly sit in tens to low hundreds of kilohertz; consumer Qi bands and automotive bands each carry their own constraints.

01Trade-offs when you raise frequency

Smaller L and C for the same reactance — more compact tanks.
Higher switching loss unless soft switching is solid.
Worse skin and proximity effects unless conductors are engineered (Litz, PCB strategies).
EMI shifts: conducted and radiated compliance change with harmonic content.

Frequency Selection — supporting diagram — Fig.: Ilustración de apoyo para “Frequency Selection”.

02Selection checklist

Start from power class, gap, coil area, semiconductor technology (Si / SiC / GaN), and the regulatory environment of the site. Then pick a frequency where ZVS is achievable across the load range and where magnetics stay cool. Frequency is a system decision — not a marketing preference.