Artículo wiki · Colección 04

Diseño del Bus DC

Referencia técnica sobre Diseño del Bus DC para el diseño, integración e implementación de sistemas de energía inalámbrica.

6 minArtículo 35/50Electrónica de Potencia

DC Bus Design — educational diagram — Fig.: Diagrama educativo de “DC Bus Design”.

The DC bus is the energy reservoir and voltage reference for the WPT inverter. Bus voltage choice trades semiconductor stress, coil current capability, and compatibility with facility power conversion. Industrial docks commonly use 400 V class or lower for smaller pedestals.

Bus design includes capacitors, pre-charge, fusing, discharge resistors, and distribution impedance to multiple inverter modules in lane configurations.

01Capacitor bank

Bulk electrolytic for energy storage; film and ceramic for high-frequency ripple.
ESR and ESL low enough that ripple does not modulate coil current detectably.
Life rating for ambient inside pad — not 105 °C datasheet at 25 °C enclosure.

DC Bus Design — supporting diagram — Fig.: Ilustración de apoyo para “DC Bus Design”.

02Safety and service

Pre-charge limits inrush when connecting to PFC or battery backup. Bleeder resistors or active discharge for technician safety after shutdown — with lockout verification. Clear labeling of bus voltage on enclosures.

03Multi-module docks

Symmetric bus bars so paralleled inverters share current.
Local cap at each module plus central bulk — model both.
Isolate faulty module without collapsing entire lane bus.