Artículo wiki · Colección 04

Sensado de Tensión

Referencia técnica sobre Sensado de Tensión para el diseño, integración e implementación de sistemas de energía inalámbrica.

6 minArtículo 41/50Electrónica de Potencia

Voltage Sensing — educational diagram — Fig.: Diagrama educativo de “Voltage Sensing”.

Voltage sensing provides feedback for PFC, inverter modulation, SR timing, and protection thresholds. High-frequency common-mode voltage on the switching node demands dividers and amplifiers rated for the environment or measurement on the isolated side.

Accuracy at light load matters for end-of-charge taper on AGV batteries.

01Techniques

Resistive dividers with filtering for DC bus and battery.
Isolated amplifiers or optocoupler sigma-delta for high common-mode environments.
Peak detectors or ADC synchronized to switching for waveform analysis in development.

Voltage Sensing — supporting diagram — Fig.: Ilustración de apoyo para “Voltage Sensing”.

02Calibration

Account for divider tolerance and temperature coefficient in charge voltage accuracy specs. BMS on vehicle may disagree with receiver sense — define which measurement is authoritative for wireless power limit.

03Protection linkage

Hardware comparators for fast OVP independent of firmware.
Coordinated shutdown with transmitter when receiver reports overvoltage.
Log OVP events with alignment metadata for root cause.