Artículo wiki · Colección 03

Empaquetado de Bobina Receptora

Referencia técnica sobre Empaquetado de Bobina Receptora para el diseño, integración e implementación de sistemas de energía inalámbrica.

6 minArtículo 40/50Diseño de Bobinas

Receiver Coil Packaging — educational diagram — Fig.: Diagrama educativo de “Receiver Coil Packaging”.

Receiver coil packaging fits the winding, ferrite, and shield into the vehicle underside with enough clearance for floor irregularities and debris. Packaging defines effective gap, thermal connection to vehicle structure, and how flux interacts with battery tray, frame rails, and motor mounts.

AMR receivers often sit in stamped pockets; AGV receivers may hang lower with skids — impact protection and potting hardness differ.

01Packaging goals

Protect coil from scrape and stone impact without adding excessive gap.
Route high-current leads with low loop area to limit EMI.
Allow service removal within fleet MTTR targets.
Maintain alignment datum to vehicle navigation frame.

Receiver Coil Packaging — supporting diagram — Fig.: Ilustración de apoyo para “Receiver Coil Packaging”.

02Chassis interaction

Steel near the receiver concentrates flux and changes L and Rac — design on a vehicle mockup, not an isolated coil. Aluminum battery enclosures eddy-current shield if too close; add standoffs per FEM recommendation.

03Validation

Vibration test per vehicle profile with coil instrumented.
Ground clearance sweep on worst-case ramp entries.
Corrosion test for outdoor AMR belly enclosures.